Product Details
This Whiteline Front Lower Control Arm Bushing Kit fits the 2006-2010 Dodge Charger SRT8 Base (LX). The kit contains 2 shell bushings and 2 tubes. This part is for the front of the vehicle. Part number W53336.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated difficult, with about 2.5 hours of work listed. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Charger SRT8: Rear Subframe Mount Bushing, Front and Rear Sway Bar Kit, and Rear Trailing Arm Lower Front Bushing.
Features
- Install guide: Instructions for fitting are packed in the box.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Material: The part is made of polyurethane.
- Bonded design: Bonding adds durability in high-load use.
Specifications
| Part Number | W53336 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006-2010 Dodge Charger SRT8 Base |
| Drivetrain | RWD |
| Chassis Code | LX |
| Bushing 1 Inner Diameter | 14.2 mm |
| Bushing 1 Outer Diameter | 69.7 mm |
| Bushing 2 Outer Diameter | 66.6 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



