Product Details
This Whiteline Front and Rear Sway Bar Link fits the 1998 Subaru Legacy GT Limited (BD/BG/BE/BH). You receive 4 links, 8 bolts, 16 washers, and 8 nuts. Whiteline part number: KLC31. Position: front and rear. Application note: Suits steel arms. Front & Rear Vehicle Set: Boxed Contains KLC26 & KLC30.
A sway bar link is the short rod that ties each end of the front and rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system.
Whiteline rates the install as easy and lists about 1 hour. A wheel alignment is not required. Other Whiteline parts we list for the Legacy: Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Bushing compound: Bushings made of a low-compliance elastomer cut flex and movement in the suspension.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Construction: Alloy construction keeps the weight down while handling the loads.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
- Install guide: Written install instructions are included with the part.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
Specifications
| Part Number | KLC31 |
| Part Name | Sway Bar Link |
| Vehicle | 1998 Subaru Legacy GT Limited |
| Drivetrain | FWD/AWD |
| Chassis Code | BD/BG/BE/BH |
| Bushing Material | Polyurethane |
| Grade Type | Performance |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 4 Links, 8 Bolts, 16 Washers, 8 Nuts |
| Length | 100 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Suits steel arms. Front & Rear Vehicle Set - Boxed Contains KLC26 & KLC30 |



