Product Details

Here are the Whiteline 14mm Adjustable Front and Rear Camber Bolts for the 1990-1996 Subaru Legacy LS (BC/BF). Placement: front and rear. Application note: Adds +/- 0.75 degrees Camber. Order it as part number KCA414. In the box: 2 bolts.

Alignment problems often come down to one angle the factory settings cannot reach. After a car is lowered, fitted with different wheels, or simply gets older, camber can drift outside the range a shop is able to correct. These bolts swap in for the originals and give the technician the extra movement needed.

Expect a difficult job of about 1 hour. An alignment is required after installation. To go with it on the Legacy, see Front Steering Rack And Pinion Mount Bushing, Front Strut Tower Brace, and Front Control Arm Lower Inner Rear Bushing.

Features

  • Locking washer: The toothed lock washer keeps the adjustment from slipping once it is tightened.
  • Corrosion protection: Plated finish keeps rust off the hardware.
  • Hardware: Nuts are supplied with the bolts.
  • Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
  • Install guide: Step-by-step installation instructions come with it.
Specifications
Part Number KCA414
Part Name Camber Bolt
Vehicle 1990-1996 Subaru Legacy LS
Chassis Code BC/BF
Adjustable Yes
Bolt Thread Diameter 14 mm
Color Gray
Installation Difficulty Difficult
Installation Time (hrs) 1
Kit Contents 2 Bolts
Nut Included Yes
Vehicle Placement Front and Rear
Wheel Alignment Required Yes
Notes Adds +/- 0.75 Degree Camber

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelNotes
1990SubaruLegacyAdds +/- 0.75 Degree Camber
1991SubaruLegacyAdds +/- 0.75 Degree Camber
1992SubaruLegacyAdds +/- 0.75 Degree Camber
1993SubaruLegacyAdds +/- 0.75 Degree Camber
1994SubaruLegacyAdds +/- 0.75 Degree Camber
1995SubaruLegacyAdds +/- 0.75 Degree Camber
1996SubaruLegacyAdds +/- 0.75 Degree Camber

Customer Reviews

Questions & Answers