Product Details
This Whiteline Adjustable Rear Sway Bar Link fits the 2010-2011 Honda Accord Crosstour. Part number KLC174. In the box: 2 links. This part is for the rear of the vehicle. Application note: Adjustable Extra Heavy Duty.
The rear sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required.
Features
- Hardware: Hardware supplied: locking nuts and washers.
- Install guide: Instructions for fitting are packed in the box.
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Anodized alloy: The alloy carries an anodized finish for durability.
Specifications
| Part Number | KLC174 |
| Part Name | Sway Bar Link |
| Vehicle | 2010-2011 Honda Accord Crosstour |
| Chassis Code | CD |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 130-155 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | No |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 130-155mm. Bolt Diameter 10mm. |
Fitment for Accord sway bar links
Fits the 2010-2011 Honda Accord Crosstour. Each model year is listed below.