Product Details
This Whiteline Adjustable Rear Sway Bar Link fits the 2005-2007 Volkswagen Passat 2.0T, 3.6, Value Edition. Whiteline's note for this fit: Suits models with control arm link mount: adjustable extra heavy duty. It goes on the rear of the vehicle. Order it as part number KLC141. You receive 2 links. Chassis code: B6. Trims named on the listing: 2.0T, 3.6, and Value Edition.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Whiteline rates the install as easy and lists about 1 hour. No alignment is needed afterward. Other Whiteline parts we list for the Passat: Adjustable Rear Upper Control Arm Set, Adjustable Front Sway Bar Link, and Front and Rear Sway Bar Kit.
Features
- Material: Built from steel.
- Install guide: Whiteline packs an install guide with it.
- Hardware: Supplied with locking nuts and washers.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Rigid design: Taking the flex out of the connection makes the car react faster to steering input.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
Specifications
| Part Number | KLC141 |
| Part Name | Sway Bar Link |
| Vehicle | 2005-2007 Volkswagen Passat 2.0T, 3.6, Value Edition |
| Chassis Code | B6 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 115-140 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Suits models with control arm link mount - adjustable extra heavy duty. Length 110-135mm |