Product Details
This Whiteline Adjustable Rear Sway Bar Link fits the 1989-1992 Toyota Cressida. Position: rear. Whiteline's note for this fit: Suits models with control arm link mount: adjustable extra heavy duty. In the box: 2 links. The part number is KLC141. Chassis code: X80.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this rear link is built to keep that connection firm. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Installation is rated easy, with about 1 hour of work listed. No alignment is needed afterward. Other Whiteline parts we list for the Cressida: Front Engine Mount.
Features
- Pre-greased: Joints arrive pre-greased and ready to install.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Material: Built from steel.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
- Install guide: Written install instructions are included with the part.
Specifications
| Part Number | KLC141 |
| Part Name | Sway Bar Link |
| Vehicle | 1989-1992 Toyota Cressida |
| Chassis Code | X80 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 115-140 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Suits models with control arm link mount - adjustable extra heavy duty. Length 110-135mm |