Product Details
Looking for rear sway bar link for your 2010-2011 Honda Accord Crosstour? The Whiteline Adjustable Rear Sway Bar Drop Links are made for it. Application note: Adjustable Extra Heavy Duty. Part number KLC139. In the box: 2 links. Position: rear. The chassis code on the listing is CD.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. No alignment is needed afterward.
Features
- DIY friendly: Goes on as a direct-fit bolt-on install.
- Warranty: Whiteline's listed warranty is 3 years and 60,000 miles.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Responsiveness: Sharpens the car's reaction in lane changes and through corners.
- Hardware: Also in the box: locking nuts and washers.
Specifications
| Part Number | KLC139 |
| Part Name | Sway Bar Link |
| Vehicle | 2010-2011 Honda Accord Crosstour |
| Chassis Code | CD |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 65-70 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 65-70mm. Bolt Diameter 10mm. |