Product Details
These Whiteline Adjustable Rear Lower Control Arms fit the 2017-2020 Toyota 86 Base. Whiteline part number: KTA216A. Placement: rear. The kit contains 2 arms, 2 bolts, 4 washers, and 2 nuts. Application note: Complete new rear arms with +/- 2.5 degrees Camber Adjustment. The listing names the Base trim. It is listed for the ZN6 chassis.
Fixed factory control arms hold the wheel in one position. An adjustable arm can be lengthened or shortened, giving an alignment shop the freedom to set camber or toe where it wants them. That helps after lowering the car or whenever the factory settings cannot be reached.
Expect an easy job of about 2 hours. Get the car aligned once it is back on the ground. Working on the same car? We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Sway Bar Vehicle Link Kit for the Toyota 86.
Features
- DIY friendly: A straightforward bolt-on job for a home mechanic.
- Warranty: Whiteline backs it with a warranty listed at 3 years and 60,000 miles.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Camber adjustment: Built-in camber adjustment at the rear, as detailed in the table below.
Specifications
| Part Number | KTA216A |
| Part Name | Control Arms |
| Vehicle | 2017-2020 Toyota 86 Base |
| Drivetrain | RWD |
| Chassis Code | ZN6 |
| Adjustable | Yes |
| Ball Joint Included | No |
| Bushings Included | Yes |
| Grade Type | Performance |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Arms, 2 Bolts, 4 Washers, 2 Nuts |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Complete new rear arms with +/- 2.5 Degree Camber Adjustment |