Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2017-2025 Audi RS 3. In the box: 2 links. Whiteline part number: KLC167A. This part is for the front of the vehicle. Whiteline's note for this fit: Adjustable Extra Heavy Duty.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect a moderate job of about 1 hour. It does not require a wheel alignment. To go with it on the RS 3, see Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Front and Rear Sway Bar Kit.
Features
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Construction: Alloy construction keeps the weight down while handling the loads.
- Anodized alloy: An anodized coating protects the alloy from corrosion and wear.
- Install guide: Step-by-step installation instructions come with it.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Hardware: Also in the box: locking nuts and washers.
Specifications
| Part Number | KLC167A |
| Part Name | Sway Bar Link |
| Vehicle | 2017-2025 Audi RS 3 |
| Chassis Code | 8V/8Y |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 320-345 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 320-345mm. Bolt Diameter 12mm. |
Fitment for RS3 sway bar links
Fits the 2017-2025 Audi RS 3. Each model year is listed below.