Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2009-2020 Dodge Journey SE, SXT. Part number KLC163. The kit contains 2 links. It is listed for the JC49 chassis. Trims named on the listing: SE and SXT. This part is for the front of the vehicle.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment. To go with it on the Journey, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Control Arm Lower Inner Rear Bushing.
Features
- Hardware: Also in the box: locking nuts and washers.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Install guide: Step-by-step installation instructions come with it.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Anodized alloy: An anodized coating protects the alloy from corrosion and wear.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 2009-2020 Dodge Journey SE, SXT |
| Chassis Code | JC49 |
| Drivetrain | AWD/FWD |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |