Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2006 BMW 325i 3 Series. Part number KLC154. Application note: Adjustable extra heavy duty. Position: front. The kit contains 2 links and 8 washers.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. Working on the same car? We also list Rear Subframe Mount Bushing, Heavy Duty 20mm Rear Sway Bar, and Rear Sway Bar Link for the 325i 3 Series.
Features
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Install guide: Step-by-step installation instructions come with it.
- Hardware: Also in the box: locking nuts and washers.
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
Specifications
| Part Number | KLC154 |
| Part Name | Sway Bar Link |
| Vehicle | 2006 BMW 325i 3 Series |
| Chassis Code | E90 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 Washers |
| Length | 290-315 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 290-315mm. Bolt diameter 10mm. |