Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 1999 BMW 328is 3 Series. Placement: front. Order it as part number KLC163. The chassis code on the listing is E36. In the box: 2 links.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Installation is rated moderate, with about 1 hour of work listed. It does not require a wheel alignment. Working on the same car? We also list Front Strut Tower Brace, Front Control Arm Lower Inner Rear Bushing, and Front Strut Tower Brace Quick Release Kit for the 328is 3 Series.
Features
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Hardware: Hardware supplied: locking nuts and washers.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Install guide: An install guide comes in the box.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 1999 BMW 328is 3 Series |
| Chassis Code | E36 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |