Product Details

This Whiteline Adjustable Front Sway Bar Link Adjustable fits the 2010-2014 Honda Insight (ZE2). Whiteline part number: KLC176. Position: front. Whiteline's note for this fit: Adjustable extra heavy duty. You receive 2 links.

The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.

Installation is rated moderate, with about 1 hour of work listed. It does not require a wheel alignment.

Features

  • Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
  • Pre-greased: Comes pre-greased, so it can go straight on the car.
  • Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
  • Anodized alloy: The alloy is anodized, adding a durable protective layer.
  • Install guide: Instructions for fitting are packed in the box.
  • Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
Specifications
Part Number KLC176
Part Name Sway Bar Link
Vehicle 2010-2014 Honda Insight
Chassis Code ZE2
Adjustable Yes
Bolt Thread Diameter 10 mm
Grade Type Performance
Grease Fitting Included No
Greaseable No
Installation Difficulty Moderate
Installation Time (hrs) 1
Kit Contents 2 Links
Length 310-335 mm
Locking Nuts Included Yes
Material Aluminum Alloy
Pre-Greased Yes
Washers Included Yes
Vehicle Placement Front
Wheel Alignment Required No
Notes Adjustable extra heavy duty. Length 310-335mm. Bolt Diameter 10mm.

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
2010HondaInsightFWDAdjustable extra heavy duty. Length 310-335mm. Bolt Diameter 10mm.
2011HondaInsightFWDAdjustable extra heavy duty. Length 310-335mm. Bolt Diameter 10mm.
2012HondaInsightFWDAdjustable extra heavy duty. Length 310-335mm. Bolt Diameter 10mm.
2013HondaInsightFWDAdjustable extra heavy duty. Length 310-335mm. Bolt Diameter 10mm.
2014HondaInsightFWDAdjustable extra heavy duty. Length 310-335mm. Bolt Diameter 10mm.

Customer Reviews

Questions & Answers