Product Details
Made to fit the 2000-2009 Honda S2000, the Adjustable Front Sway Bar Drop Links from Whiteline. Order it as part number KLC139. Whiteline's note for this fit: Adjustable Extra Heavy Duty. The kit contains 2 links. Position: front. The chassis code on the listing is AP1/AP2.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Whiteline rates the install as moderate and lists about 1 hour. A wheel alignment is not required. To go with it on the S2000, see Adjustable Rear Sway Bar Link, Front Upper Control Arm Bushing Kit, and Tie Rod Boot Kit.
Features
- Responsiveness: Sharpens the car's reaction in lane changes and through corners.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Hardware: The kit includes locking nuts and washers.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Warranty: Whiteline backs it with a warranty listed at 3 years and 60,000 miles.
- Material: Built from steel.
Specifications
| Part Number | KLC139 |
| Part Name | Sway Bar Link |
| Vehicle | 2000-2009 Honda S2000 |
| Chassis Code | AP1/AP2 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 65-70 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 65-70mm. Bolt Diameter 10mm. |