Product Details
This Whiteline 33mm Front Sway Bar Bushing Kit fits the 2018-2026 Jeep Wrangler (JL). Whiteline part number: W23689. Included: 2 bushings. Position: front.
Sway bar mount bushings work as the bearings of the roll-control system. They need to hold the bar firmly without binding, and they have to cope with constant twisting. A new set restores that balance and quiets the knocks that worn ones make. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 1 hour. No alignment is needed afterward. To go with it on the Wrangler, see 2-Point Adjustable 20mm Rear Sway Bar, Front Lower Trailing Arm Bushing Kit, and Adjustable Front Upper Control Arm Set.
Features
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Install guide: Written install instructions are included with the part.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
Specifications
| Part Number | W23689 |
| Part Name | Sway Bar Bushings |
| Vehicle | 2018-2026 Jeep Wrangler |
| Chassis Code | JL |
| Bar Diameter | 33 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Grade Type | Improved Design |
| Grade Type | Performance |
| Grade Type | Premium |
| Grease Fitting Included | No |
| Inside Diameter | 33 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bushings |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 62.5 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | - |