Product Details
This Whiteline 24mm Rear Sway Bar Mount Kit fits the 1998-2007 Subaru Impreza WRX RS. You receive 2 bushings, 2 mounts, 2 saddles, 4 bolts, and 12 washers. Part number KBR21-24. This part is for the rear of the vehicle.
Sway bar mount bushings work as the bearings of the roll-control system. They need to hold the bar firmly without binding, and they have to cope with constant twisting. A new set restores that balance and quiets the knocks that worn ones make. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. To go with it on the Impreza WRX RS, see Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and 14mm Adjustable Front Camber Bolts.
Features
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Anodized alloy: The alloy carries an anodized finish for durability.
- Install guide: Step-by-step installation instructions come with it.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
- Hardware: Hardware supplied: mounting hardware.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
Specifications
| Part Number | KBR21-24 |
| Part Name | Sway Bar Mount |
| Vehicle | 1998-2007 Subaru Impreza WRX RS |
| Drivetrain | AWD |
| Chassis Code | GC/GF/GD/GG |
| Bar Diameter | 24 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Inside Diameter | 24 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bushings, 2 Mounts, 2 Saddles, 4 Bolts, 12 Washers |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |