Product Details
These Whiteline 16mm Adjustable Front Camber Bolts fit the 2019-2022 Toyota RAV4. The chassis code on the listing is XA50. Part number KCA416. This part is for the front of the vehicle. The kit contains 2 bolts.
These bolts are a simple way to get adjustment where the factory provided none. They bolt in where a standard fastener sits, and once the alignment is set a toothed lock washer keeps it from creeping, so the angle stays where the shop left it.
Expect a moderate job of about 1 hour. An alignment is required after installation. Working on the same car? We also list Adjustable Rear Upper Control Arm Set, Rear Upper Control Arm Bushing Kit, and 25.5mm Front Sway Bar Mount Bushing Kit for the RAV4.
Features
- Hardware: The matching nuts are included.
- Install guide: Instructions for fitting are packed in the box.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Locking washer: The teeth on the lock washer keep the bolt from turning once it is tightened.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
Specifications
| Part Number | KCA416 |
| Part Name | Camber Bolt |
| Vehicle | 2019-2022 Toyota RAV4 |
| Chassis Code | XA50 |
| Drivetrain | AWD/FWD |
| Adjustable | Yes |
| Adjustable Angle | Yes |
| Adjustment Type | Camber |
| Bolt Thread Diameter | 16 mm |
| Color | Gray |
| Grade Type | OEM Performance |
| Grade Type | Performance |
| Grade Type | Premium |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |