Product Details
This Whiteline 15mm Sway Bar Bushing Kit fits the 1960-1970 Ford Falcon. The chassis code on the listing is Unibody. Whiteline part number: W21999-24. You receive 2 bushings.
The sway bar sits in rubber bushings that let it rotate as it twists. When those bushings wear or compress, the bar slides and shifts in its mounts, which causes clunking and a slight delay before it begins to resist roll. Replacement bushings hold the bar in its proper place while still letting it turn. The polyurethane used here deflects much less than the original rubber under the same load.
Expect an easy job of about 1 hour. No alignment is needed afterward. To go with it on the Falcon, see Front Sway Bar Washer Kit, Front Sway Bar Link, and Front Lower Inner Control Arm Bushing.
Features
- Install guide: Whiteline packs an install guide with it.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
- Easy to fit: Made with the installer in mind, so it goes in without special equipment.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
Specifications
| Part Number | W21999-24 |
| Part Name | Sway Bar Bushings |
| Vehicle | 1960-1970 Ford Falcon |
| Drivetrain | RWD |
| Chassis Code | Unibody |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Grade Type | Regular |
| Grease Fitting Included | No |
| Inside Diameter | 24 mm |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bushings |
| Mounting Hardware Included | No |
| Wheel Alignment Required | No |
| Notes | - |