Product Details
These Whiteline 14mm Adjustable Front Camber Bolts fit the 2007-2009 Suzuki XL-7. Chassis code: TY. Whiteline's note for this fit: Adds +/- 0.75 degrees Camber. Included: 2 bolts. It goes on the front of the vehicle. Whiteline part number: KCA414.
Alignment problems often come down to one angle the factory settings cannot reach. After a car is lowered, fitted with different wheels, or simply gets older, camber can drift outside the range a shop is able to correct. These bolts swap in for the originals and give the technician the extra movement needed.
Installation is rated difficult, with about 1 hour of work listed. Get the car aligned once it is back on the ground.
Features
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Hardware: Nuts are supplied with the bolts.
- Install guide: Instructions for fitting are packed in the box.
- Locking washer: The toothed lock washer keeps the adjustment from slipping once it is tightened.
- Corrosion protection: The hardware is plated to stand up to road conditions.
Specifications
| Part Number | KCA414 |
| Part Name | Camber Bolt |
| Vehicle | 2007-2009 Suzuki XL-7 |
| Chassis Code | TY |
| Drivetrain | AWD/FWD |
| Adjustable | Yes |
| Bolt Thread Diameter | 14 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |


