Product Details
These Whiteline 14mm Adjustable Front Camber Bolts fit the 2001-2005 Pontiac Aztek. Order it as part number KCA414. You receive 2 bolts. It is listed for the U-Body chassis. Position: front. Whiteline's note for this fit: Adds +/- 0.75 degrees Camber.
Alignment problems often come down to one angle the factory settings cannot reach. After a car is lowered, fitted with different wheels, or simply gets older, camber can drift outside the range a shop is able to correct. These bolts swap in for the originals and give the technician the extra movement needed.
Installation is rated difficult, with about 1 hour of work listed. Plan on a wheel alignment afterward.
Features
- Locking washer: A toothed lock washer holds the setting without relying on friction alone.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Install guide: Step-by-step installation instructions come with it.
- Hardware: Nuts are supplied with the bolts.
Specifications
| Part Number | KCA414 |
| Part Name | Camber Bolt |
| Vehicle | 2001-2005 Pontiac Aztek |
| Chassis Code | U-Body |
| Drivetrain | AWD/FWD |
| Adjustable | Yes |
| Bolt Thread Diameter | 14 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |