Product Details
These Whiteline 14mm Adjustable Front Camber Bolts fit the 1998-2001 Plymouth Neon. Application note: Adds +/- 0.75 degrees Camber. Position: front. The part number is KCA414. Included: 2 bolts. It is listed for the PL chassis.
Camber is how far the top of the wheel leans in or out when you look at the car from the front, and it decides how the tire meets the road. Many cars leave little or no room to change it at the factory. A camber bolt replaces a standard mounting bolt with an adjustable one, so an alignment shop can move the setting into a better range.
Installation is rated difficult, with about 1 hour of work listed. Get the car aligned once it is back on the ground. To go with it on the Neon, see Tie Rod Boot Kit.
Features
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Hardware: Nuts are supplied with the bolts.
- Camber adjustment: Helps keep camber in range so the tire holds its footprint through a corner.
- Locking washer: A toothed lock washer holds the setting without relying on friction alone.
- Install guide: Whiteline packs an install guide with it.
Specifications
| Part Number | KCA414 |
| Part Name | Camber Bolt |
| Vehicle | 1998-2001 Plymouth Neon |
| Chassis Code | PL |
| Adjustable | Yes |
| Bolt Thread Diameter | 14 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |
Fitment for Neon camber bolts
Fits the 1998-2001 Plymouth Neon. Each model year is listed below.