Product Details
These Whiteline 14mm Adjustable Front Camber Bolts fit the 1995-2023 Nissan Maxima (A32/A33/A34). Order it as part number KCA414. It goes on the front of the vehicle. You receive 2 bolts. Whiteline's note for this fit: Adds +/- 0.75 degrees Camber.
These bolts are a simple way to get adjustment where the factory provided none. They bolt in where a standard fastener sits, and once the alignment is set a toothed lock washer keeps it from creeping, so the angle stays where the shop left it.
Whiteline rates the install as difficult and lists about 1 hour. An alignment is required after installation. To go with it on the Maxima, see Front Sway Bar Link Bushing (28.5mm OD), Rear Sway Bar Link Bushing (28.5mm OD), and Front Lower Control Arm - Inner Rear Bushing Double Offset Kit.
Features
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Hardware: Nuts are supplied with the bolts.
- Locking washer: A toothed lock washer holds the setting without relying on friction alone.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Install guide: Whiteline packs an install guide with it.
Specifications
| Part Number | KCA414 |
| Part Name | Camber Bolt |
| Vehicle | 1995-2023 Nissan Maxima |
| Chassis Code | A32/A33/A34 |
| Adjustable | Yes |
| Bolt Thread Diameter | 14 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |


