Product Details
Whiteline built the 14mm Adjustable Front Camber Bolts for the 1989-2011 Hyundai Sonata. Position: front. In the box: 2 bolts. Part number KCA414. It is listed for the YF/LF/DN8 chassis. Whiteline's note for this fit: Adds +/- 0.75 degrees Camber.
Alignment problems often come down to one angle the factory settings cannot reach. After a car is lowered, fitted with different wheels, or simply gets older, camber can drift outside the range a shop is able to correct. These bolts swap in for the originals and give the technician the extra movement needed.
Whiteline rates the install as difficult and lists about 1 hour. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Sonata: Adjustable Rear Upper Control Arm Set and Front Lower Inner Forward Control Arm Bushing Kit.
Features
- Locking washer: The toothed lock washer keeps the adjustment from slipping once it is tightened.
- Camber adjustment: Helps keep camber in range so the tire holds its footprint through a corner.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Hardware: Nuts are supplied with the bolts.
- Install guide: Instructions for fitting are packed in the box.
Specifications
| Part Number | KCA414 |
| Part Name | Camber Bolt |
| Vehicle | 1989-2011 Hyundai Sonata |
| Chassis Code | YF/LF/DN8 |
| Adjustable | Yes |
| Bolt Thread Diameter | 14 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |