Product Details
These Whiteline 12mm Adjustable Front Camber Bolts fit the 1999-2005 Pontiac Grand Am. It is listed for the N-Body chassis. In the box: 2 bolts. Order it as part number KCA412. Position: front. Whiteline's note for this fit: Adds +/- 0.75 degrees Camber.
These bolts are a simple way to get adjustment where the factory provided none. They bolt in where a standard fastener sits, and once the alignment is set a toothed lock washer keeps it from creeping, so the angle stays where the shop left it.
Expect a difficult job of about 1 hour. An alignment is required after installation.
Features
- Corrosion protection: Plated finish keeps rust off the hardware.
- Install guide: Instructions for fitting are packed in the box.
- Hardware: Nuts are supplied with the bolts.
- Locking washer: The teeth on the lock washer keep the bolt from turning once it is tightened.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
Specifications
| Part Number | KCA412 |
| Part Name | Camber Bolt |
| Vehicle | 1999-2005 Pontiac Grand Am |
| Chassis Code | N-Body |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |
Fitment for Grand Am camber bolts
Fits the 1999-2005 Pontiac Grand Am. Each model year is listed below.


