Product Details
These Whiteline 12mm Adjustable Front Camber Bolts fit the 1999-2002 Daewoo Nubira. Placement: front. Whiteline's note for this fit: Adds +/- 0.75 degrees Camber. You receive 2 bolts. Whiteline part number: KCA412.
Camber is how far the top of the wheel leans in or out when you look at the car from the front, and it decides how the tire meets the road. Many cars leave little or no room to change it at the factory. A camber bolt replaces a standard mounting bolt with an adjustable one, so an alignment shop can move the setting into a better range.
Installation is rated difficult, with about 1 hour of work listed. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Nubira: Front Lower Inner Front Control Arm Bushing Kit.
Features
- Corrosion protection: Plated finish keeps rust off the hardware.
- Locking washer: A toothed lock washer secures the adjustment.
- Install guide: Instructions for fitting are packed in the box.
- Hardware: The matching nuts are included.
- Camber adjustment: Designed to optimize camber alignment and offset the effect of body roll and tire roll in corners.
Specifications
| Part Number | KCA412 |
| Part Name | Camber Bolt |
| Vehicle | 1999-2002 Daewoo Nubira |
| Chassis Code | J100 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |
Fitment for Nubira camber bolts
Fits the 1999-2002 Daewoo Nubira. Each model year is listed below.


