Product Details
These Whiteline 12mm Adjustable Front Camber Bolts fit the 1996-1997 Ford Probe Base (GE). Application note: Adds +/- 0.75 degrees Camber. Trim named on the listing: Base. Included: 2 bolts. It goes on the front of the vehicle. It is listed for the GE chassis. The part number is KCA412.
Camber is how far the top of the wheel leans in or out when you look at the car from the front, and it decides how the tire meets the road. Many cars leave little or no room to change it at the factory. A camber bolt replaces a standard mounting bolt with an adjustable one, so an alignment shop can move the setting into a better range.
Expect a difficult job of about 1 hour. Get the car aligned once it is back on the ground. Working on the same car? We also list Adjustable Front Sway Bar Link and Rear Sway Bar Link for the Probe.
Features
- Hardware: Nuts are supplied with the bolts.
- Camber adjustment: Helps keep camber in range so the tire holds its footprint through a corner.
- Install guide: Written install instructions are included with the part.
- Locking washer: A toothed lock washer holds the setting without relying on friction alone.
- Corrosion protection: Rust protection comes from plating on the metal parts.
Specifications
| Part Number | KCA412 |
| Part Name | Camber Bolt |
| Vehicle | 1996-1997 Ford Probe Base |
| Chassis Code | GE |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |