Whiteline 12mm Adjustable Front Camber Bolts for 1980-1995 Dodge Colt (C10/CA/CB) KCA412
Whiteline 12mm Adjustable Front Camber Bolts for the Dodge Colt

Whiteline

|

SKU: KCA412

Whiteline 12mm Adjustable Front Camber Bolts for 1981-1995 Dodge Colt (C10/CA/CB)

$47.59

MSRP $52.88 You save $5.29

Ask a question
In stock, ready to ship

Authorized DealerGenuine parts & warranty
20+ Years in BusinessTrusted since 2005
Free USA ShippingOn orders $250+
Best Price GuaranteeWe’ll match or beat it
Fitment Notes

All fitment information on our website is provided by the manufacturer. It is the customer's responsibility to thoroughly read the product description and confirm fitment before placing an order and proceeding with installation.

Unless specified otherwise, all suspension products are designed for 2WD vehicles only. Any notes or descriptions related to electronic damping systems (EDC, DDS, etc.) apply strictly to vehicle fitment. Aftermarket coilovers are not compatible with OEM electronic damping control systems unless explicitly stated.

*Product images may not represent the actual SKU.

Handling Time

All handling times are estimates and may change at any time.

  • In-Stock: 1 business day
  • Out of Stock: 3-4 weeks
30-Day Returns

Not quite right? No problem — we offer hassle-free 30-day returns on eligible items. A few exclusions apply.

More Information

Lifetime Manufacturer Warranty

All Whiteline products, except those listed below, are covered by a lifetime warranty against manufacturing defects in material and workmanship, valid for the original vehicle the product was installed on.

Whiteline Ball Joints, Tie Rod Ends, Bearings, Links and Springs are covered for 3 years or 60,000 km (36,000 miles), whichever comes first.

Exclusions
The warranty does not cover:

  • Incorrect installation or misuse.
  • Modification or alteration of parts.
  • Damage due to competition, motorsport, or off-road use.
  • Wear and tear from normal use.
  • Accidental or collision damage.

More Information

Product Details

These Whiteline 12mm Adjustable Front Camber Bolts fit the 1981-1995 Dodge Colt. Whiteline part number: KCA412. Whiteline's note for this fit: Adds +/- 0.75 degrees Camber. You receive 2 bolts. It goes on the front of the vehicle. The chassis code on the listing is C10/CA/CB.

These bolts are a simple way to get adjustment where the factory provided none. They bolt in where a standard fastener sits, and once the alignment is set a toothed lock washer keeps it from creeping, so the angle stays where the shop left it.

Installation is rated difficult, with about 1 hour of work listed. Plan on a wheel alignment afterward.

Features

  • Camber adjustment: Designed to optimize camber alignment and offset the effect of body roll and tire roll in corners.
  • Install guide: Whiteline packs an install guide with it.
  • Locking washer: A toothed lock washer holds the setting without relying on friction alone.
  • Corrosion protection: The hardware is plated to stand up to road conditions.
  • Hardware: Nuts are supplied with the bolts.
Specifications
Part Number KCA412
Part Name Camber Bolt
Vehicle 1981-1995 Dodge Colt
Chassis Code C10/CA/CB
Adjustable Yes
Bolt Thread Diameter 12 mm
Color Gray
Installation Difficulty Difficult
Installation Time (hrs) 1
Kit Contents 2 Bolts
Nut Included Yes
Vehicle Placement Front
Wheel Alignment Required Yes
Notes Adds +/- 0.75 Degree Camber

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
1981DodgeColtFWDAdds +/- 0.75 Degree Camber
1982DodgeColtFWDAdds +/- 0.75 Degree Camber
1983DodgeColtFWDAdds +/- 0.75 Degree Camber
1984DodgeColtFWDAdds +/- 0.75 Degree Camber
1985DodgeColtFWDAdds +/- 0.75 Degree Camber
1986DodgeColtFWDAdds +/- 0.75 Degree Camber
1987DodgeColtFWDAdds +/- 0.75 Degree Camber
1988DodgeColtFWDAdds +/- 0.75 Degree Camber
1989DodgeColtFWDAdds +/- 0.75 Degree Camber
1990DodgeColtFWDAdds +/- 0.75 Degree Camber
1991DodgeColtFWDAdds +/- 0.75 Degree Camber
1992DodgeColtFWDAdds +/- 0.75 Degree Camber
1993DodgeColtFWDAdds +/- 0.75 Degree Camber
1994DodgeColtFWDAdds +/- 0.75 Degree Camber
1995DodgeColtFWDAdds +/- 0.75 Degree Camber

Customer Reviews

Questions & Answers