Product Details
These Whiteline 12mm Adjustable Front Camber Bolts fit the 1977-1988 Porsche 924 Base. Position: front. The listing names the Base trim. The part number is KCA412. In the box: 2 bolts. Application note: Adds +/- 0.75 degrees Camber. The chassis code on the listing is 924 Platform.
Alignment problems often come down to one angle the factory settings cannot reach. After a car is lowered, fitted with different wheels, or simply gets older, camber can drift outside the range a shop is able to correct. These bolts swap in for the originals and give the technician the extra movement needed.
Expect a difficult job of about 1 hour. Plan on a wheel alignment afterward.
Features
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Install guide: Written install instructions are included with the part.
- Locking washer: A toothed lock washer secures the adjustment.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Hardware: Nuts are supplied with the bolts.
Specifications
| Part Number | KCA412 |
| Part Name | Camber Bolt |
| Vehicle | 1977-1988 Porsche 924 Base |
| Drivetrain | RWD |
| Chassis Code | 924 Platform |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |