Product Details
These Stance XR2 86 coilovers fit the 2017-2020 Toyota 86 (ZN6).
The Stance XR2 coilovers for the ZN6 86 are 2-Way adjustable coilovers for daily driving, canyon roads and occasional track days. Every Stance XR2 kit is dyno-tested at the Stance facility in Texas and ships ready to install.
The XR2 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date.
The Stance XR2 coilovers for the ZN6 86 lower the car to an adjustable ride height and keep the factory suspension geometry. Spring rates and damping come preset. Ride height and damping adjust independently for daily driving, autocross or track use.
Features
- 16 levels compression / 16 levels rebound: independent 2-way adjustment
- Inverted monotube damper for high-load track use
- Larger-bore monotube body for higher fluid capacity and fade resistance
- Pillowball front top mounts (camber plates included on strut applications)
- Heat-treated chromoly piston rod, CNC-machined aluminum brackets
- Two-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated
- Fully rebuildable and revalvable: custom valving available from Stance
- Swift Springs and helper spring upgrades are available, contact us to add them
2-Way Independent Damping
The XR2 separates compression and rebound damping into two independent adjusters with 16 clicks each, 256 combinations in all. Soften compression for road texture without losing rebound control, or stiffen rebound for transient response without hammering over bumps.
Inverted Monotube Damper
The inverted monotube design delivers far greater lateral rigidity than upright dampers, preventing shaft binding under heavy load and keeping damping consistent through full suspension travel.
Digressive Damping with 2-Way Refinement
Digressive valving controls chassis movement on transitions while blowing off big-bump forces for grip. With independent compression and rebound, you can shape the digressive curve in two directions, fine-tuning grip and ride quality separately.
Two-Stage Corrosion-Resistant Coating
XR2 damper bodies receive the same two-stage finish as the XR1: zinc phosphate pre-treatment plus an electrodeposited polymer coating that has cleared 1,000+ hours of salt-spray testing.
Rebuildable & Revalvable for Life
XR2 coilovers are fully rebuildable and revalvable. Send the kit back to Stance's Texas facility for service or a custom valving spec to match your tire setup, weight bias, or track configuration.
Specifications
| Part Number | ST-ZN6-XR2 |
| Part Name | Stance XR2 |
| Vehicle | 2017-2020 Toyota 86 (ZN6) |
| Chassis Code | ZN6 |
| Drivetrain | RWD |
| Damping Adjustment | 2-Way · 16 Levels Compression / 16 Levels Rebound |
| Ride-Height Adjustable | Yes |
| Spring Rate - Front | 7 kg/mm |
| Spring Rate - Rear | 8 kg/mm |
| Upper Mount - Front | Solid Pillowball |
| Upper Mount - Rear | Solid Pillowball |
| Damper Type - Front | Inverted Monotube |
| Damper Type - Rear | Upright |
| Suspension Design - Front | True Coilover |
| Suspension Design - Rear | True Coilover |
| Camber Plates - Front | Included |
| Camber Plates - Rear | Not Applicable |
| Notes | - |