Product Details

These MTS Technik Street Series coilovers fit the 2011-2026 Volkswagen Up! Hatchback (12/BL). The Street Series is the default setup MTS engineers suggest, with a wide range of lowering adjustment. It combines comfort and stiffness for spirited driving that stays usable every day.

MTS coilovers let you adjust the suspension height to your preference and to road conditions. The firmer suspension makes the car more predictable to drive.

With these MTS Volkswagen Up! coilovers you can reset the ride height when you swap between larger summer wheels and smaller winter wheels.

Standard Features:

  • 2-year warranty with no mileage limit.
  • Corrosion-resistant components.
  • Twin-tube dampers for stable damping.
  • Gas pressure on the hydraulic fluid stops the oil from foaming, so the dampers keep working under continuous hard use.
  • The thread and its wide adjustment range let you set the ride height precisely.
  • hexaCOIL spring perch for easier height adjustment.
  • Shock bodies have a double layer of gold zinc and the adjusters are anodized aluminum, for corrosion resistance.
  • Coilover springs made by Eibach.
Specifications
Part Number MTSGWVW62
Part Name Street Series Coilovers
Vehicle 2011-2026 Volkswagen Up! Hatchback
Chassis Code 12/BL
Engine 1.0 GTI Petrol / 1.0 TSI Petrol / 1.0L Petrol
Ride-Height Adjustable Yes
Damping Adjustment Non-Adjustable
Series Street
Housing Gold
Lowering Axle - Front 25-60 mm
Lowering Axle - Rear 25-45 mm
Max Axle Load - Front 770 kg
Max Axle Load - Rear 660 kg
Camber Plates - Front No
Camber Plates - Rear No
Quantity Full Set (Front & Rear)
Notes
  • Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
  • Not for 4x4.
  • If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
  • During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0.2 inch). Otherwise use certificated wheel spacers.
  • Rear thread adjustment block is mounted on the bottom.
  • For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
2011VolkswagenUpFWD
2012VolkswagenUpFWD
2013VolkswagenUpFWD
2014VolkswagenUpFWD
2015VolkswagenUpFWD
2016VolkswagenUpFWD
2017VolkswagenUpFWD
2018VolkswagenUpFWD
2019VolkswagenUpFWD
2020VolkswagenUpFWD
2021VolkswagenUpFWD
2022VolkswagenUpFWD
2023VolkswagenUpFWD
2024VolkswagenUpFWD
2025VolkswagenUpFWD
2026VolkswagenUpFWD

Customer Reviews

Questions & Answers