Product Details

These MTS Technik Street Series coilovers fit the 1981-1994 Volkswagen Polo MK2 Hatchback FWD (86C/80). The Street Series is the default setup MTS engineers suggest, with a wide range of lowering adjustment. It combines comfort and stiffness for spirited driving that stays usable every day.

MTS coilovers let you adjust the suspension height to your preference and to road conditions. The firmer suspension makes the car more predictable to drive.

With these MTS Volkswagen Polo MK2 coilovers you can reset the ride height when you swap between larger summer wheels and smaller winter wheels.

Standard Features:

  • 2-year warranty with no mileage limit.
  • Corrosion-resistant components.
  • Twin-tube dampers for stable damping.
  • Gas pressure on the hydraulic fluid stops the oil from foaming, so the dampers keep working under continuous hard use.
  • The thread and its wide adjustment range let you set the ride height precisely.
  • hexaCOIL spring perch for easier height adjustment.
  • Shock bodies have a double layer of gold zinc and the adjusters are anodized aluminum, for corrosion resistance.
  • Coilover springs made by Eibach.
Specifications
Part Number MTSGWVW14
Part Name Street Series Coilovers
Vehicle 1981-1994 Volkswagen Polo MK2 Hatchback
Chassis Code 86C/80
Engine 0.9L Petrol / 1.0 Cat Petrol / 1.0L Petrol / 1.1L Petrol / 1.3 Cat Petrol / 1.3 D Diesel / 1.3L Petrol / 1.4 D Diesel
Ride-Height Adjustable Yes
Damping Adjustment Non-Adjustable
Series Street
Housing Gold
Lowering Axle - Front 35-85 mm
Lowering Axle - Rear 35-75 mm
Max Axle Load - Front 640 kg
Max Axle Load - Rear 630 kg
Camber Plates - Front No
Camber Plates - Rear No
Quantity Full Set (Front & Rear)
Notes
  • Front and rear axle height adjustable (threaded shock absorber housing).
  • If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
  • During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0.2 inch). Otherwise use certificated wheel spacers.
  • The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
1981VolkswagenPoloFWD
1982VolkswagenPoloFWD
1983VolkswagenPoloFWD
1984VolkswagenPoloFWD
1985VolkswagenPoloFWD
1986VolkswagenPoloFWD
1987VolkswagenPoloFWD
1988VolkswagenPoloFWD
1989VolkswagenPoloFWD
1990VolkswagenPoloFWD
1991VolkswagenPoloFWD
1992VolkswagenPoloFWD
1993VolkswagenPoloFWD
1994VolkswagenPoloFWD

Customer Reviews

Questions & Answers