Product Details

These MTS Technik Street Series coilovers fit the 1979-1984 Opel Kadett D Hatchback (31). The Street Series is the default setup MTS engineers suggest, with a wide range of lowering adjustment. It combines comfort and stiffness for spirited driving that stays usable every day.

MTS coilovers let you adjust the suspension height to your preference and to road conditions. The firmer suspension makes the car more predictable to drive.

With these MTS Opel Kadett D coilovers you can reset the ride height when you swap between larger summer wheels and smaller winter wheels.

Standard Features:

  • 2-year warranty with no mileage limit.
  • Corrosion-resistant components.
  • Twin-tube dampers for stable damping.
  • Gas pressure on the hydraulic fluid stops the oil from foaming, so the dampers keep working under continuous hard use.
  • The thread and its wide adjustment range let you set the ride height precisely.
  • hexaCOIL spring perch for easier height adjustment.
  • Shock bodies have a double layer of gold zinc and the adjusters are anodized aluminum, for corrosion resistance.
  • Coilover springs made by Eibach.
Specifications
Part Number MTSGWOP33
Part Name Street Series Coilovers
Vehicle 1979-1984 Opel Kadett D Hatchback
Chassis Code 31
Engine 1.0L Petrol / 1.2 S Petrol / 1.2L Petrol / 1.3 N Petrol / 1.3 S Petrol / 1.6 D Diesel / 1.6 S Petrol / 1.8 GT/E Petrol
Ride-Height Adjustable Yes
Damping Adjustment Non-Adjustable
Series Street
Housing Gold
Lowering Axle - Front 40-105 mm
Lowering Axle - Rear 70-100 mm
Max Axle Load - Front 760 kg
Max Axle Load - Rear 1165 kg
Camber Plates - Front Yes
Camber Plates - Rear No
Quantity Full Set (Front & Rear)
Notes
  • Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
  • Only for vehicles without NIVO / OEM pneumatic suspension.
  • If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
  • During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0.2 inch). Otherwise use certificated wheel spacers.
  • Set includes 2x upper "camber plates" on the front axle.
  • The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.
  • Rear thread adjustment block is mounted on the bottom.
  • Not for Kombi.

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
1979OpelKadettFWD
1980OpelKadettFWD
1981OpelKadettFWD
1982OpelKadettFWD
1983OpelKadettFWD
1984OpelKadettFWD

Customer Reviews

Questions & Answers