Product Details

These MTS Technik Street Series coilovers fit the 2009-2017 Audi A4 Allroad B8 Estate (8KH). The Street Series is the default setup MTS engineers suggest, with a wide range of lowering adjustment. It combines comfort and stiffness for spirited driving that stays usable every day.

MTS coilovers let you adjust the suspension height to your preference and to road conditions. The firmer suspension makes the car more predictable to drive.

With these MTS Audi A4 B8 coilovers you can reset the ride height when you swap between larger summer wheels and smaller winter wheels.

Standard Features:

  • 2-year warranty with no mileage limit.
  • Corrosion-resistant components.
  • Twin-tube dampers for stable damping.
  • Gas pressure on the hydraulic fluid stops the oil from foaming, so the dampers keep working under continuous hard use.
  • The thread and its wide adjustment range let you set the ride height precisely.
  • hexaCOIL spring perch for easier height adjustment.
  • Shock bodies have a double layer of gold zinc and the adjusters are anodized aluminum, for corrosion resistance.
  • Coilover springs made by Eibach.
Specifications
Part Number MTSGWAU21
Part Name Street Series Coilovers
Vehicle 2009-2017 Audi A4 Allroad B8 Estate
Chassis Code 8KH
Engine 2.0 TDI quattro Diesel / 2.0 TFSI quattro Petrol / 3.0 TDI quattro Diesel
Ride-Height Adjustable Yes
Damping Adjustment Non-Adjustable
Series Street
Housing Gold
Lowering Axle - Front 35-65 mm
Lowering Axle - Rear 35-60 mm
Max Axle Load - Front 1080 kg
Max Axle Load - Rear 1265 kg
Camber Plates - Front No
Camber Plates - Rear No
Quantity Full Set (Front & Rear)
Notes
  • Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
  • Only for vehicles without electronic damping.
  • If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
  • During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0.2 inch). Otherwise use certificated wheel spacers.
  • Rear thread adjustment block is mounted on the top.
  • For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
2009AudiAllroadAWD
2010AudiAllroadAWD
2011AudiAllroadAWD
2012AudiAllroadAWD
2013AudiAllroadAWD
2014AudiAllroadAWD
2015AudiAllroadAWD
2016AudiAllroadAWD
2017AudiAllroadAWD

Customer Reviews

Questions & Answers