Product Details
These MTS Technik Street Series coilovers fit the 2011-2019 BMW 118d (F20). MTS coilovers let you adjust the suspension height to your preference and to road conditions. The firmer suspension makes the car more predictable to drive.
With these MTS F20 118d coilovers you can reset the ride height when you swap between larger summer wheels and smaller winter wheels.
MTS coilovers have a 2-year warranty with no mileage limit.
Standard Features:
- 2-year warranty with no mileage limit.
- Corrosion-resistant components.
- Twin-tube dampers for stable damping.
- Gas pressure on the hydraulic fluid stops the oil from foaming, so the dampers keep working under continuous hard use.
- The thread and its wide adjustment range let you set the ride height precisely.
- hexaCOIL spring perch for easier height adjustment.
- Shock bodies have a double layer of gold zinc and the adjusters are anodized aluminum, for corrosion resistance.
- Coilover springs made by Eibach.
Product Notes
- When the adjustable spring seat is set too low according the catalogue, all guarantees will be withdrawn.
- Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
- Not for 4x4.
- Only for vehicles without NIVO / factory pneumatic suspension.
- If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
- During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
- Rear thread adjustment block is mounted on the top.
- Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case. If you do not want to see a suspension error, use MTS Warning Canceller. Ask the seller for details.
Specifications
| Part Number | MTSGWBM24 |
| Part Name | Street Series Coilovers |
| Vehicle | 2011-2019 BMW 118d |
| Engine | 114 / 116 / 118 / 120 / 125 / 114d / 116d / 118d / 120d / 125d |
| Chassis Code | F20 |
| Notes | Fits EU/JDM-market models only. This vehicle was not sold in the USA. |
| Damping Adjustment | Non-Adjustable |
| Ride-Height Adjustable | Yes | Lowering Front Axle | 25 - 60 mm |
| Lowering Rear Axle | 30 - 60 mm |
| Max Axle Load Front | 921 - 1090 kg |
| Max Axle Load Rear | 1230 kg |
| Camber Plates | Not Included |
| Quantity | Full Set (Front & Rear) |




