Product Details

These MTS Technik Stance Series coilovers fit the 1996-2004 Porsche Boxster Convertible (986). The Stance Series is for drivers whose priority is wheel fitment. It is stiffer than the Street Series and allows precise height adjustment down to a minimal gap at the wheel arch.

MTS coilovers let you adjust the suspension height to your preference and to road conditions. The firmer suspension makes the car more predictable to drive.

With these MTS 986 Boxster coilovers you can reset the ride height when you swap between larger summer wheels and smaller winter wheels.

Standard Features:

  • 2-year warranty with no mileage limit.
  • Corrosion-resistant components.
  • Twin-tube dampers for stable damping.
  • Gas pressure on the hydraulic fluid stops the oil from foaming, so the dampers keep working under continuous hard use.
  • The thread and its wide adjustment range let you set the ride height precisely.
  • Camber plates allow wheel angle adjustment.
  • hexaCOIL spring perch for easier height adjustment.
  • Extra height adjustment at the lower mount changes the drop without changing how the springs work.
  • Shock bodies have a double layer of gold zinc and the adjusters are anodized aluminum, for corrosion resistance.
  • Coilover springs made by Eibach.
Specifications
Part Number MTSGWPO02-S
Part Name Stance Series Coilovers
Vehicle 1996-2004 Porsche Boxster Convertible
Chassis Code 986
Engine 2.5L Petrol / 2.7L Petrol / S 3.2 Petrol
Ride-Height Adjustable Yes
Damping Adjustment 1-Way
Series Stance
Housing Gold
Lowering Axle - Front 10-45 mm
Lowering Axle - Rear 10-40 mm
Max Axle Load - Front 775 kg
Max Axle Load - Rear 940 kg
Camber Plates - Front No
Camber Plates - Rear No
Quantity Full Set (Front & Rear)
Notes
  • Front and rear axle height adjustable (threaded shock absorber housing).
  • If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
  • During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0.2 inch). Otherwise use certificated wheel spacers.

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
1996PorscheBoxsterRWD
1997PorscheBoxsterRWD
1998PorscheBoxsterRWD
1999PorscheBoxsterRWD
2000PorscheBoxsterRWD
2001PorscheBoxsterRWD
2002PorscheBoxsterRWD
2003PorscheBoxsterRWD
2004PorscheBoxsterRWD

Customer Reviews

Questions & Answers