Product Details

These MTS Technik Stance Series coilovers fit the 1985-1986 BMW 735i (E23). MTS coilovers let you adjust the suspension height to your preference and to road conditions. The firmer suspension makes the car more predictable to drive. With these MTS E23 735i coilovers you can reset the ride height when you swap between larger summer wheels and smaller winter wheels.

Standard Features

  • The Stance Series is for drivers who want a larger drop and a stiffer setup.
  • A set for drivers who want a large drop and a tight fit between wheel and arch.
Specifications
Part Number MTSGWBM29-S
Part Name Stance Series Coilovers
Vehicle 1985-1986 BMW 735i
Chassis Code E23
Ride-Height Adjustable Yes
Damping Adjustment Non-Adjustable
Series Stance
Housing Gold
Camber/Top Mount - Front Axle Yes
Camber/Top Mount - Rear Axle No
Coilover Main Spring - Front Spring Rate (80 N/mm)
Coilover Helper Spring - Front Spring Rate (20 N/mm)
Coilover Main Spring - Rear Spring Rate (70 N/mm)
Coilover Helper Spring - Rear Spring Rate (20 N/mm)
Quantity Full Set (Front & Rear)
Additional Information Strut Diameter at the Front Axle of 52 mm
Notes
  • Front and Rear axle height adjustable (threaded shock absorber housing).
  • If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
  • During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0.2 inch). Otherwise use certificated wheel spacers.
  • Independent height adjustment at the lower brackets on the Front dampers.
  • Set includes 2x upper "camber plates" on the Front axle.
  • The installation requires the use of OE Front struts - they should be cut and welded as described in the attached manual.
  • In some cases additional OE-parts for the installation of the suspension components are required. Those are not included in the set.
  • Including M-Technik.
  • Only suitable for vehicles manufactured from 09/1981.
  • 65 - Suspension compatible only with a Rear top mount with an internal diameter of 78mm - OEM number: 33521117657 or 33521126987. It is possible to mount the suspension to cars equipped with other top mounts, but original parts marked with one of the above numbers will be required.
  • 66 - In the case of cars equipped with Nivo, it will be required to replace the Rear top mounts with OEM: 33521117657 or 33521126987.

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
1985BMW735iRWD
1986BMW735iRWD

Customer Reviews

Questions & Answers