MTS Technik MTS x Pro-Kit Suspension Lowering Kit for 2010-2015 Volkswagen Passat B7 Estate (365)

Product Details

This MTS Technik x Pro-Kit lowering kit fits the 2010-2015 Volkswagen Passat B7 Estate (365). The MTS x Eibach Pro-Kit Performance Suspension Kit lowers the car and sharpens its handling. This MTS Volkswagen Passat B7 lowering kit cuts body roll under hard braking, hard acceleration and tight corners, which makes the car more stable.

The kit pairs shortened MTS shock absorbers with Eibach Pro-Kit lowering springs.

Standard Features:

• Uses Eibach Pro-Kit springs for a sportier stance with everyday comfort.
• Lowers the center of gravity for more cornering grip and less body roll.
• Springs and dampers are matched to each other.
• Dampers have a corrosion-resistant finish.
• A complete replacement suspension kit.

Product Notes

• If not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products. The specifications indicated in the Components Certificate are for the classification of the item / vehicle.
• Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter "K" in your vehicle registration certificate or to find at the type plate of your car!).
• Please verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de. In case of non-conformance the items must not be fitted – please refer to your dealer. Mounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online. Mounting position - you can "read" the mounting position of the springs from the imprint - have them installed just the way you read the imprint. Wheel adjustment - after completion of the spring/suspension installation, checking the wheel adjustment is required. Here all wheel/tire-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required. Depending on engine, gearbox/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. The applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.
• If your vehicle has serial electronic damper control this will not be available anymore while using the MTS Technik x Eibach suspension kit.
• You will see a trouble code.
• This can be re-programed by an official garage/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.
• Without levelling control.
• Except vehicles with 4WD.
• Rear shock absorbers dedicated exclusively to vehicles with multi-link rear axle suspension.

Specifications