Product Details
This Whiteline Transmission Mount Bushing Kit fits the 1974-1985 Chevrolet Impala (B-Body). Application note: Replaces 1 bolt and 2 bolt style mounts. You receive 1 mount, 4 washers, 2 nuts, and 2 bolts. Whiteline part number: W93467.
The transmission is held in the chassis by a mount that absorbs vibration. A soft or worn mount lets the gearbox rock when you shift or get on and off the throttle, which feels like a jerk, a clunk, or a delay. A firmer mount or bushing limits that motion. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 1 hour. It does not require a wheel alignment. To go with it on the Impala, see Front Sway Bar Link Kit, Ball Joint Boot Kit, and Front Upper and Lower Control Arm Bushing Kit.
Features
- Install guide: Instructions for fitting are packed in the box.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Easy to fit: Designed for an easy install with ordinary shop equipment.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Hardware: Supplied with mounting hardware.
- Bushing material: The bushing material is polyurethane, a firmer choice than rubber.
Specifications
| Part Number | W93467 |
| Part Name | Transmission Mount Bushings |
| Vehicle | 1974-1985 Chevrolet Impala |
| Drivetrain | RWD |
| Chassis Code | B-Body |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Durometer | 72 |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 1 Mount, 4 Washers, 2 Nuts, 2 Bolts |
| Material | Polyurethane |
| Mounting Hardware Included | Yes |
| Wheel Alignment Required | No |
| Notes | Replaces 1 bolt and 2 bolt style mounts |