Product Details
This Whiteline Transmission Mount Bushing Kit fits the 1967-1992 Chevrolet Camaro (F-Body). Order it as part number W93467. The kit contains 1 mount, 4 washers, 2 nuts, and 2 bolts. Whiteline's note for this fit: Replaces 1 bolt and 2 bolt style mounts.
The transmission is held in the chassis by a mount that absorbs vibration. A soft or worn mount lets the gearbox rock when you shift or get on and off the throttle, which feels like a jerk, a clunk, or a delay. A firmer mount or bushing limits that motion. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. We also list 16mm Adjustable Front Camber Bolts, Ball Joint Boot Kit, and Front Upper and Lower Control Arm Bushing Kit for the Camaro.
Features
- Bushing material: The bushing material is polyurethane, a firmer choice than rubber.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Install guide: Written install instructions are included with the part.
- Hardware: The kit includes mounting hardware.
- Easy to fit: Made with the installer in mind, so it goes in without special equipment.
Specifications
| Part Number | W93467 |
| Part Name | Transmission Mount Bushings |
| Vehicle | 1967-1992 Chevrolet Camaro |
| Drivetrain | RWD |
| Chassis Code | F-Body |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Durometer | 72 |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 1 Mount, 4 Washers, 2 Nuts, 2 Bolts |
| Material | Polyurethane |
| Mounting Hardware Included | Yes |
| Wheel Alignment Required | No |
| Notes | Replaces 1 bolt and 2 bolt style mounts |