Whiteline Tie Rod Boot Kit for 1964-1974 Chevrolet C10 Pickup (C/K) W93458

Whiteline

|

SKU: W93458

Whiteline Tie Rod Boot Kit for 1964-1974 Chevrolet C10 Pickup (C/K)

$6.19

MSRP $6.88 You save $0.69

Ask a question
In stock, ready to ship

Authorized DealerGenuine parts & warranty
20+ Years in BusinessTrusted since 2005
Free USA ShippingOn orders $250+
Best Price GuaranteeWe’ll match or beat it
Fitment Notes

All fitment information on our website is provided by the manufacturer. It is the customer's responsibility to thoroughly read the product description and confirm fitment before placing an order and proceeding with installation.

Unless specified otherwise, all suspension products are designed for 2WD vehicles only. Any notes or descriptions related to electronic damping systems (EDC, DDS, etc.) apply strictly to vehicle fitment. Aftermarket coilovers are not compatible with OEM electronic damping control systems unless explicitly stated.

*Product images may not represent the actual SKU.

Handling Time

All handling times are estimates and may change at any time.

  • In-Stock: 1 business day
  • Out of Stock: 3-4 weeks
30-Day Returns

Not quite right? No problem — we offer hassle-free 30-day returns on eligible items. A few exclusions apply.

More Information

Lifetime Manufacturer Warranty

All Whiteline products, except those listed below, are covered by a lifetime warranty against manufacturing defects in material and workmanship, valid for the original vehicle the product was installed on.

Whiteline Ball Joints, Tie Rod Ends, Bearings, Links and Springs are covered for 3 years or 60,000 km (36,000 miles), whichever comes first.

Exclusions
The warranty does not cover:

  • Incorrect installation or misuse.
  • Modification or alteration of parts.
  • Damage due to competition, motorsport, or off-road use.
  • Wear and tear from normal use.
  • Accidental or collision damage.

More Information

Product Details

This Whiteline Tie Rod Boot Kit fits the 1964-1974 Chevrolet C10 Pickup (C/K). Whiteline part number: W93458. Application note: Rod End Dia. Included: 2 bushings.

A tie rod end lasts only as long as its seal does. New boots restore that seal, which helps the joint last and keeps play from developing in the steering or suspension, provided the joint itself is still good.

Expect a moderate job of about 1 hour. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Chevrolet C10: Body Mount Bushing Kit, Transmission Mount Bushing Kit, and Front Upper and Lower Control Arm Bushing Kit.

Features

  • Install guide: Instructions for fitting are packed in the box.
  • Grease: Molybdenum disulfide grease is included to help the parts last.
  • Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
  • Easy to fit: Installation does not call for special skills or tools.
  • Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
Specifications
Part Number W93458
Part Name Tie Rod Boots
Vehicle 1964-1974 Chevrolet C10 Pickup
Drivetrain RWD
Chassis Code C/K
Installation Difficulty Moderate
Installation Time (hrs) 1
Kit Contents 2 Bushings
Rod End Diameter 1.625 in.
Shaft Diameter 0.65 in.
Wheel Alignment Required Yes
Notes Rod End Dia. 1.625 in.- Shaft Dia. 0.650 in.

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
1964ChevroletC10RWDRod End Dia. 1.625 in.- Shaft Dia. 0.650 in.
1965ChevroletC10RWDRod End Dia. 1.625 in.- Shaft Dia. 0.650 in.
1966ChevroletC10RWDRod End Dia. 1.625 in.- Shaft Dia. 0.650 in.
1967ChevroletC10RWDRod End Dia. 1.625 in.- Shaft Dia. 0.650 in.
1968ChevroletC10RWDRod End Dia. 1.625 in.- Shaft Dia. 0.650 in.
1969ChevroletC10RWDRod End Dia. 1.625 in.- Shaft Dia. 0.650 in.
1970ChevroletC10RWDRod End Dia. 1.625 in.- Shaft Dia. 0.650 in.
1971ChevroletC10RWDRod End Dia. 1.625 in.- Shaft Dia. 0.650 in.
1972ChevroletC10RWDRod End Dia. 1.625 in.- Shaft Dia. 0.650 in.
1973ChevroletC10RWDRod End Dia. 1.625 in.- Shaft Dia. 0.650 in.
1974ChevroletC10RWDRod End Dia. 1.625 in.- Shaft Dia. 0.650 in.

Customer Reviews

Questions & Answers