Product Details
This Whiteline Rear Upper Outer Control Arm Bushing Kit fits the 2010-2012 Volkswagen Passat CC (B6). The kit contains 2 bushings and 2 tubes. This part is for the rear of the vehicle. Part number W63550.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. To go with it on the Passat CC, see Adjustable Rear Sway Bar Link Kit, Ball Joint Boot Kit, and Adjustable Rear Lower Toe Arm Set.
Features
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Material: The part is made of polyurethane.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Install guide: An install guide comes in the box.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Easy to fit: Made with the installer in mind, so it goes in without special equipment.
Specifications
| Part Number | W63550 |
| Part Name | Control Arm Bushings |
| Vehicle | 2010-2012 Volkswagen Passat CC |
| Chassis Code | B6 |
| Drivetrain | AWD/FWD |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 40.3 mm |
| Bushing Quantity | 2 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |