Product Details
This Whiteline Rear Upper Outer Control Arm Bushing Kit fits the 1997-2006 Honda CR-V LX (RD). Application note: In hub: adds +/- 1.0 degrees Camber. This part is for the rear of the vehicle. The part number is KCA368. You receive 4 bushings and 2 tubes.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Expect a moderate job of about 3 hours. Plan on a wheel alignment afterward. Other Whiteline parts we list for the CR-V: 16mm Adjustable Front Camber Bolts and Rear Sway Bar Link.
Features
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Material: The part is made of polyurethane.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Install guide: Written install instructions are included with the part.
Specifications
| Part Number | KCA368 |
| Part Name | Control Arm Bushings |
| Vehicle | 1997-2006 Honda CR-V LX |
| Chassis Code | RD |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 42 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 42 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | In hub - adds +/- 1.0Degree Camber; |