Product Details
This Whiteline Rear Upper Inner Control Arm Bushing Kit fits the 2006-2010 Mazda 5 (CR). Included: 2 shell bushings and 2 tubes. Whiteline's note for this fit: Suits cast arm. On-car adjustable allows +/-1.0 degrees Camber. Order it as part number KCA394. Position: rear.
Most factory control arm bushings are centered and fixed. An offset one is built so the arm sits at a slightly different angle, which changes camber, and the firmer material stops that setting drifting under load.
Installation is rated moderate, with about 2 hours of work listed. Plan on a wheel alignment afterward. Other Whiteline parts we list for the Mazda 5: Adjustable Rear Upper Control Arm Set, Front Control Arm Lower Inner Front Bushing, and Front Steering Bump Steer Correction Kit.
Features
- Finish: The metal is powder coated, which resists corrosion and wear.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Material: Polyurethane construction.
- Install guide: Step-by-step installation instructions come with it.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
Specifications
| Part Number | KCA394 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006-2010 Mazda 5 |
| Chassis Code | CR |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 38 mm |
| Bushing 2 Outer Diameter | 36.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 38 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Suits cast arm. On-car adjustable allows +/-1.0Degree Camber; |