Product Details
This Whiteline Rear Upper Outer Control Arm Bushing (Standard Repl.) fits the 2001-2005 Honda Civic DX, EX, GX, HX, LX (ES/EP). Application note: In hub: Standard Replacement. Whiteline part number: W63383. Placement: rear. You receive 2 bushings and 2 tubes. Chassis code: ES/EP.
A fresh control arm bushing is one of the more cost-effective ways to bring a tired suspension back. It swaps the worn factory part for one that holds the arm steady again while keeping the ride close to stock.
Installation is rated moderate, with about 3 hours of work listed. Get the car aligned once it is back on the ground. To go with it on the Civic, see Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and 14mm Adjustable Front Camber Bolts.
Features
- Finish: The metal parts are powder coated for durability.
- Material: Made from polyurethane.
- Install guide: Instructions for fitting are packed in the box.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
Specifications
| Part Number | W63383 |
| Part Name | Control Arm Bushing |
| Vehicle | 2001-2005 Honda Civic DX, EX, GX, HX, LX |
| Chassis Code | ES/EP |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 42 mm |
| Bushing Quantity | 2 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | In hub - Standard Replacement |