Product Details
This Whiteline Rear Upper Outer Control Arm Bushing Kit fits the 2006 Subaru Outback R VDC Limited (BP/BR). In the box: 4 bushings and 2 tubes. Order it as part number KCA399. This part is for the rear of the vehicle. Application note: On-Car Adjustable Allows +/- 1.25 degrees.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 3 hours. Plan on a wheel alignment afterward. Other Whiteline parts we list for the Outback: Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- Material: Made from polyurethane.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Install guide: Instructions for fitting are packed in the box.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Camber adjustment: Helps keep camber in range so the tire holds its footprint through a corner.
Specifications
| Part Number | KCA399 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006 Subaru Outback R VDC Limited |
| Chassis Code | BP/BR |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 34 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 12 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | On-Car Adjustable Allows +/- 1.25 Degrees; |