Product Details
This Whiteline Rear Upper Outer Control Arm Bushing Kit fits the 2003-2005 Honda Civic Hybrid (ES/EP). This part is for the rear of the vehicle. Included: 4 bushings and 2 tubes. Application note: In hub: adds +/- 1.0 degrees Camber. The part number is KCA368.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Whiteline rates the install as moderate and lists about 3 hours. An alignment is required after installation. We also list 14mm Adjustable Front Camber Bolts, Adjustable Sway Bar Vehicle Link Kit, and 2-Point Adjustable 22mm Rear Sway Bar for the Civic.
Features
- Grease: Moly grease is supplied to prolong the life of the parts.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Material: Made from polyurethane.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
Specifications
| Part Number | KCA368 |
| Part Name | Control Arm Bushings |
| Vehicle | 2003-2005 Honda Civic Hybrid |
| Chassis Code | ES/EP |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 42 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 42 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | In hub - adds +/- 1.0Degree Camber; |