Product Details
This Whiteline Rear Upper Outer Control Arm Bushing Kit fits the 2002-2004 Subaru Outback H6 (BE/BH/BP). You receive 4 bushings and 2 tubes. Part number KCA399. This part is for the rear of the vehicle. Application note: On-Car Adjustable Allows +/- 1.25 degrees.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. Polyurethane resists deflection far better than the soft rubber it replaces.
Installation is rated moderate, with about 3 hours of work listed. An alignment is required after installation. To go with it on the Outback, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Steering Rack And Pinion Mount Bushing.
Features
- Install guide: An install guide comes in the box.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Material: Polyurethane construction.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
Specifications
| Part Number | KCA399 |
| Part Name | Control Arm Bushing |
| Vehicle | 2002-2004 Subaru Outback H6 |
| Chassis Code | BE/BH/BP |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 34 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 12 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | On-Car Adjustable Allows +/- 1.25 Degrees; |



