Product Details
This Whiteline Rear Upper Inner Control Arm Bushing Kit fits the 2012 Ford Focus Electric, Titanium (C307). In the box: 2 shell bushings and 2 tubes. Whiteline's note for this fit: Suits cast arm. On-car adjustable allows +/-1.0 degrees Camber. Placement: rear. Part number KCA394.
Camber is the sideways lean of the wheel when viewed from the front. An offset control arm bushing places the pivot slightly off-center, which shifts the wheel's camber by a small, fixed amount without replacing the arm. On a lowered car that is often enough to bring the tires back toward an even footprint.
Installation is rated moderate, with about 2 hours of work listed. An alignment is required after installation. To go with it on the Focus, see Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Adjustable Front Sway Bar Link.
Features
- Bonded design: Bonding adds durability in high-load use.
- Install guide: Instructions for fitting are packed in the box.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Material: Built from polyurethane.
- Finish: The metal parts are powder coated for durability.
Specifications
| Part Number | KCA394 |
| Part Name | Control Arm Bushing |
| Vehicle | 2012 Ford Focus Electric, Titanium |
| Chassis Code | C307 |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 38 mm |
| Bushing 2 Outer Diameter | 36.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 38 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Suits cast arm. On-car adjustable allows +/-1.0Degree Camber; |