Product Details
This Whiteline Front Sway Bar Link Assembly fits the 2009-2015 Nissan Frontier PRO-4X (D40). Order it as part number KLC180-090. In the box: 2 links and 4 washers. Whiteline's note for this fit: Adjustable Extra Heavy Duty. It goes on the front of the vehicle.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. Other Whiteline parts we list for the Frontier: Front Lower Inner Control Arm Bushing, Rear Essential Vehicle Kit, and Rear Sway Bar Link Kit.
Features
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
- Anodized alloy: An anodized coating protects the alloy from corrosion and wear.
- Install guide: Instructions for fitting are packed in the box.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
Specifications
| Part Number | KLC180-090 |
| Part Name | Sway Bar Link |
| Vehicle | 2009-2015 Nissan Frontier PRO-4X |
| Chassis Code | D40 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 4 Washers |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | No |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 90-115mm. Bolt Diameter 12mm. |



