Product Details
This Whiteline Front Sway Bar Link fits the 2003-2008 Nissan 350Z Base (Z33). Included: 2 links. Placement: front. Whiteline's note for this fit: Adjustable Extra Heavy Duty. Whiteline part number: KLC110.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect a moderate job of about 1 hour. No alignment is needed afterward. To go with it on the 350Z, see Adjustable Rear Sway Bar Link, Adjustable Sway Bar Vehicle Link Kit, and Front and Rear Sway Bar Kit.
Features
- Construction: Made from strong, light alloy.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Install guide: Step-by-step installation instructions come with it.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Hardware: Hardware supplied: locking nuts and washers.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
Specifications
| Part Number | KLC110 |
| Part Name | Sway Bar Link |
| Vehicle | 2003-2008 Nissan 350Z Base |
| Chassis Code | Z33 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 90-115mm. Bolt diameter 12mm. |


